5000W Wind Turbine Solar MPPT Hybrid Charge Controller 24V 48V Booster Regulator

Description: Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization. There is internal resistance in Wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power. Protect wind generator from over-revolution speed, over-voltage and over-current Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the set ones, PWM intelligent unloading will start automatically. That protect wind generator. Intelligent limiting of batteries max current Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controllercould calculate the maximum charging current. Then batteries will be protected. Function of manual brake Wind charging manual switch On the controller you can manually set whether using wind charge to battery or not. Solar charging manual switch On the controller you can manually set whether using solar charge to battery or not. BOOST function Once wind generator voltage is lower than battery voltage, controller starts boost module automatically to charge to battery. Battery wiring(the positive and negative cannot be reversed) Connect battery positive and negative wires to controller as show. Be careful when connecting the battery to avoid short circuits Before connecting the battery, keep the battery switch of controller (BATTERY) OFF, Do not switch it to ON until you confirm the connection is correct and safe. Although this product has a protective function to prevent reverse connection of the battery, it avoids reverse connection of the positive and negative of the battery. Solar wiring(the positive and negative cannot be reversed) Connect solar positive and negative wires to controller as shown. The solar PV array may produce high voltages in sunlight. Be careful of electric shock when wiring. Although controller has the protection of solar anti-reverse, but anti-connecting of positive and negative is forbidden. Wind generator wiring(regardless of positive and negative ) Connect wind generator wires to controller as shown. The wind generator could produce high voltage. Be careful of electric shock. It is recommended to connect the wind turbine under wind or no breeze conditions. The high-speed rotating wind turbine must not be connected until the controller is started. Parameter information Rated voltage of battery 24V、48V、 96V、 120V Rated power for wind turbine :3KW Rated power for solar panels 2KW Maximum photovoltaic access voltage:180V below 96V, 350V above 96V (except for special parameters) Maximum connection voltage of wind:180V below 96V, 350V above 96V (except for special parameters) Start speed of unloading(Rota):500R (adjustable) Wind pole pair (Pole):10D（adjustable） Wind unloading way: Internal resistance unloading and external resistance unloading (different power corresponds to different unloading methods, subject to the actual situation) Dump load control mode:Over rotate speed limiting, Over voltage limiting, Over Current limiting, PWM. Wind charging mode:MPPT(boost) Photovoltaic charging mode:PWM Display mode:LCD Load:NO Display content Battery: voltage;charging current; Percentage of battery power. Wind: voltage; charging current; rotate speed; output current; output power. System: state; generated energy; error code. Operating temperature and humidity range :﹣20~﹢55℃/35~85%RH(Non-condensing) Static power consumption ≤3W Protection type Battery:over-discharge protection; over-charge protection; anti reverse connection. Wind: Over rotate speed protection, over voltage protection, over current protection. Controller /Outer package size NW./GW 460*400*165.4mm/530*480*285mm 14kg/16.5kg

Price: 589.99 USD

Location: Wuxi

End Time: 2024-08-17T02:38:20.000Z

Shipping Cost: 0 USD

Product Images

5000W Wind Turbine Solar MPPT Hybrid Charge Controller 24V 48V Booster Regulator

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Current Output: 20-29 A

System Configuration: Off-Grid

Maximum Input Power: 1801-2000 W

Power Source: Wind

Maximum Input Voltage: 41-50 V

Color: Yellow

Wattage: 4500-4999 W

Current Rating: 21-30 A

Rated Wind Speed: 12M/S

Brand: WEITER-ENERGY

Current Type: AC/DC

Type: Charge Controller

Voltage: 41-50 V

Axis Orientation: Horizontal

Recommended Environment: Indoor

Features: Brushless Motor, LCD Display, Smart Module

Resistance Properties: Corrosion Resistant, Fingerprint Resistant, Grease Resistant, Heat Pressure Resistant, Heat Resistant, Ozone Resistant

Charging Mode: MPPT (Maximum Power Point Tracking)

Country/Region of Manufacture: China

Application: Camping/Hiking, Commercial, Electronics, Home/Garden

Protection Properties: Lightning Protection, Overcharge Protection, Overcurrent Protection, Overload Protection, Overspeed Protection, Overvoltage Protection, Reverse Polarity Protection

Power: 1801-2000 W