F3 Flight Controller integrated OSD Current Meter 4 IN 1 5A 1S Blheli

Description: JMT Crazybee F3 Flight Controller OSD Current Meter 4 IN 1 5A 1S Blheli_S ESC Compatible Frsky / Flysky / DSM/2 DSM/X Receiver for Whoop RC DroneCompatible with Frsky or Flysky or DSM-2 DSM-X Receiver optional, Please choose the item according to your transmitter. Crazybee F3 flight controller is a Ultimate version for 1S Whoop brushless racing drone, its the world first Tiny whoop size brushless flight controller with Receiver/4in1 ESC/OSD/Current Meter all in one design, include all your needs .Now the new version for DSM2/DSMX is coming Specifications:Firmware: Betaflight_3.5.0_CrazybeeMCU: STM32F303CCT6 (72MHZ, 256K FLASH)Sensor: MPU-6000(SPI connection)Power supply: 1S battery input (DC 3.5-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Serial-based Spektrum compatible DSM2/DSMX satellite receiverBuilt-in Betaflight OSD(SPI Controll)Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)Built-in 5V 0.8A BEC with LC filterBuilt-in voltage detectionBLHELI_S pass-through ReadyHeading LED ReadyBoard size: 28.5 * 28.5MMBoard weight: 3.5 gESC parameters:Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)Current: 5A continuous peak 6A (3 seconds)Support BLHeliSuite programmableFactory firmware: O_L_5_REV16_6.HEXSignal Support: Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWMReceiver parameters:Serial-based Spektrum DSM-2/DSM-X compatible Satellite receiverDSM-2/DSM-X compatibleChannels: 6ch~9ch(according to your transmitter)Failsafe supportNo ground interference ( Transmitting and receiving 1 m from the ground): 300mDSM2/DSMX version receiver configuration:Binding procedure:(1) Connect Crazybee F3 DSM2/DSMX Version to computer and open Betaflight configurator, From CLI tab type: "set spektrum_sat_bind = 9" for DSMX radio or "set spektrum_sat_bind = 5" for DSM2 radio(2) Type "save" and after Flight controller reboot remove USB cable (=Power off the board)(3) Wait a second and reconnect the USB cable. After cold start satellite led combo on the backside of the board (2 red led+2 white led) should start blinking and transmitter should be turned on while pressing the bind button(4) After binding satellite led should be solid. Connect Betaflight and use receiver tab to test that satellite is working correctly.(5) Final step is to go to CLI tab and type "set spektrum_sat_bind = 0" and then type "save". This must be done so that satellite doesnt go back to binding mode when the flight controller is repowered again.Package Included:1 x 4 in 1 Crazybee flight controller ESCDear Clients ,Thanks for you choosing our products 。About Taxs problems , thats citizens obligation , if you have any request of the price of declaration to your country customs , please kindly contact us in advance , We would like to help you and discuss the best solution for you . On Sep-20-18 at 00:53:26 PDT, seller added the following information:

Price: 36.2 USD

Location: 深圳

End Time: 2023-11-22T06:00:08.000Z

Shipping Cost: 0 USD