Green Dot RD3-006 Reflex Sight 4 SIG SAUER P226 Springfield HK USP Colt 1911

Description: The HK USP dovetail has two popular width, one is 10mm, another size is 12mm. This plate fits 10mm dovetail, it does NOT fit the 12mm dovetail. Please MEASURE before purchasing. Below is a list of HK USP models come with both size 10mm and 12mm dovetails. HK made the different sizes over different production run. Need to confirm before purchasing. USP Tactical 9mm (need to check dovetail size)USP Tactical .45 ACP(need to check dovetail size)USP 9mm(need to check dovetail size)USP 40 S&W(need to check dovetail size)USP .45 ACP(need to check dovetail size) New design just released on Aug 23 2017. Manufacturer Part# RD3-006b-1The red dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield.Can also be used with a long range rifle scope for that perfect Backup SystemThe on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settingsLenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight pictureFully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)Fully shockproof and fogproof. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture Fully windage and elevation adjustable and lockable 3 MOA5 Illumination Settings. Powered by a lithium CR2032 battery(Included) Magnification: 1X Sight Window: 25mm x 16mm; .98" x .62" Elevation Adustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m) Windage Adjustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m) Set Value for One Scale Division: 1 MOA or 1" @ 100 yds with 60 scale divisions per turn Subtension of the Aiming Dot: 4 MOA (10.5 cm @ 100 m) Parallax-Free Sighting Distance: approx. 50 yds Recoil Resistance: At least 1000 Gs Operating Temperature Range: -10°F to +130°F (-25°C to +55°C) Storage Temperature Range: -40°F to +160°F (-40°C to +70°C) Power Supply: 3V with one CR 2032 Lithium battery Dimensions: L 2.0" x W 1.0" x H 1.1" (52 mm x 26 mm x 28 mm) Weight (in operating condition without mounting materials): 0.9 oz (25 g). Included: Allen wrench to tighten fasteners Screwdriver Adjusting disc Protective cap 3V Lithium battery (CR 2032) Operating instructions Weaver/Picatinny-style mountExtra rubber sealing ring for battery compartment This ADE RD3-006, alone with RD3-009,RD3-012,RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS. ADE sights has the footprint of Doctor/Vortex Venom type footprint. This RD3-006, and RD3-009, RD3-012 and RD3-013 fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately. There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions. There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact. The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. Payments are accepted through Paypal. We ship through USPS First Class Mail from Oregon, west part of the country should receive in 1-3 days,middle part and east part of the country should receive in 3-6 days!NO INTERNATIONAL SHIPPING! We promise our best quality and the lowest price for our customers, if the item is not as the description in the listing page, we will issue a exchange or full refund. if the item is the same as the description, we willl charge a 15% restocking fee. We are a new seller on Ebay, all our prices are really low compare to others, because we want to earn feedbacks. Please understand our feedback will be left once after we have received feedback from buyer. Our goal is to place a profit margin of $1 ~ $3 per item and sell in volume. As such, the more you save the more we make. While the others are selling 1 item, we are selling 10 ~ 20 items due to our price reduction. Please use the "Ask Seller A Question" button. Please allow up to 24 hours for a response. Usually the buyer will get response in 6 hours. Customer Satisfaction • Please contact us right away (via eBay Messages) if you have any concerns, questions or issues about your purchase – and before you leave feedback. • If you give us the chance, we will make every effort to make it right for you! • We strive for five stars from you in feedback – and work hard to earn it. • Customer satisfaction is very important to us and our goal is to have every customer want to be a repeat customer. Track Page Views With Auctiva's FREE Counter

Price: 69.03 USD

Location: Oregon City, Oregon

End Time: 2024-02-29T19:19:16.000Z

Shipping Cost: 0 USD