Happymodel Mobula7 1S Micro FPV Whoop Drone X12 5-IN-1 AIO Fight Controller

Description: Happymodel Mobula7 1S Micro FPV Whoop Drone We’re glad to launched our new Mobula7 drone , this time the 75mm whoop based on 1s power. Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1s Will be the best choice in the whoop season. Notice:ELRS version will ship on February 18Frsky/Flysky/PNP version will ship on March 20The world first 5-IN-1 AIO flight controller with ExpressLRS 2.0 , OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. This is amazing flight controller for Brushless whoop. You could get unbelievable RX and VTX range by using this flight controller. The new RS0802 motors comes with a new unibell design, use 1.5mm shaft and include PCB bottom plate, high efficiency and much more reliable. New onboard OpenVTX , max power up to 400mw, provide RCE and PIT mode, it was very useful for race event. Features:X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OpenvtxVTX Power up to 400mwELRS V2.0 SupportNEW RS0802 KV20000 motorsRuncam Nano3 The lightest 1/3 CMOS 800TVL CameraSmooth and powerfulCompatible for 1S Lipo/LIHVRecommend 1S 450mah/550mah/650mah battery(Not include) Specifications:Brand Name: HappymodelItem Name: Mobula7 1S 75mm Micro FPV whoop droneWheelbase: 75mmSize: 99mm*99mm*40mmWeight: 24g Receiver option:2.4G ELRS SPISPI Frsky D8/D16SPI FlyskyPNP (without onboard receiver) Package includes:Item NameQtyMobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame)1Option1: X12 ELRS V1.0 flight controller built-in SPI ELRS 2.4G receiver1Option2: X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiverOption3: X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiverOption4: X12 PNP V1.0 flight controller without onboard receiverRS0802 KV20000 brushless motor4Gemfan 1610-2 bi-blade propellers(4cw+4ccw)1Runcam Nano3 1/3 CMOS 800TVL camera1Onboard 5.8G Openvtx 0mw~400mw VTX11S parallel charging board1Propeller disassemble tool1Extra camera canopy1 Spare parts specifications:MotorMode: RS0802 KV20000Configu-ration:9N12PStator Diamter:8mmStator Length:2mmShaft Diameter:Φ1.5mmMotor Dimension(Dia.*Len):Φ10.5mm*13.5mmWeight(g):2.0gNo.of Cells(Lipo):1S onlyPropellersWeight:0.24gMaterial:PCPitch:1 inchProps Dia:40mmCenter Thickness:5mmCenter Hole Dia:1.5mmFlight controllerX12 ELRS V1.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FRX12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FSX12 PNP V1.0 flight controller without onboard receiver Target: CRAZYBEEF4DXMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU6000 or ICM20689(SPI connection)Mount hole size: 25.5mm*25.5mmPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 12A(each) Blheli_S 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OpenVTX 0mw~400mwBuilt-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2ABuilt-in voltage detectionBuilt-in current sensorOnboard 4in1 ESCPower supply: 1S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)Support BLHeliSuite programmableFactory firmware: Z_H_30_REV16_7.HEXDefault protocol: DSHOT300Support Bluejay firmwareOnboard SPI ExpressLRS 2.4GHz ReceiverPacket Rate option: 50Hz/150Hz/250Hz/500HzExpressLRS Firmware version: V2.0RF Frequency: 2.4GHzAntenna : SMD antennaTelemetry output Power: <12dBmReceiver protocol: SPI ExpressLRSCompatible with ExpressLRS V2.0 TX ModuleCouldn’t flash separately ExpressLRS firmwareOnboard Frsky SPI D8/D16 receiver VersionSPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 modelChannels: 8chNo ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe supportOnboard Flysky SPI receiver VersionSPI BUS receiverProtocol: AFHDS and AFHDS-2A SwitchableChannels: 8ch(AFHDS) or 14ch(AFHDS-2A)No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe supportPNP Version(without onboard receiver)Full UART1 for external ReceiverSupport CRSF/GHOST/SBUS/IBUS/DSMX protocolIR1 pad(invert RX1) used for SBUS inputOnboard 5.8g OPENVTXFirmware version: OPENVTXSmartaudio v2.1PIT Mode supportRCE Mode supportChannels:48chTransmitting Power: 0/RCE/25mw/100mw/400mwPower supply: DC 5VCurrent (5v): <650ma (400mw)Runcam Nano3Model: RunCam Nano 3Image Sensor: 1/3" CMOSHorizontal Resolution: 800TVLLens : 2.1mm(M8) FOV 150°Signal System: NTSCS/N Ratio: >50dBElectronic Shutter Speed: AutoAuto Gain Control (AGC): AutoMin. Illumination: 0.01Lux@1.2FD-WDR: AutoDay/Night: ColorPower:DC 3-5.5VCurrent: 110mA@5V 120mA@3.3VHousing Material: ABSNet Weight: 1.2gDimensions: L14mm*W14mm*H9mmLipo BatteryCapacity:650mAhVoltage:3.8vContinuous Discharge Rate: 30CInstantaneous discharge rate: 60CSize: 60mmx18mmx8mmWeight: 16gConnector: PH2.0

Price: 126.94 USD

Location: Shenzhen

End Time: 2025-01-25T11:58:49.000Z

Shipping Cost: 5 USD