JVCC UHMW Polyethylene Film Tape (UHMW-PE-5): 1/2 in. x 5 ft. (Natural/Transluce

Description: Product HighlightsJVCC UHMW-PE-5 UHMW Polyethylene Film Tape is a 5 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications.Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications.Release Liner: now either a white paper or blue film. Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic.Thickness: 11 mils (carrier, adhesive, liner) 7 mils (carrier, adhesive) 2 mils (adhesive) 5 mils (carrier) 4 mils (liner). Adhesion: 60 ounces per inch (to stainless steel test panel). Tensile Strength: 30 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Elongation: 300%. Core: 3-inch diameter. JVCC UHMW-PE-5 UHMW Polyethylene Film Tape is a 5 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on either a white paper or a blue film release liner (changes depending on the lot we received in last). Made in the U.S. Technical Information- Core: 3 inch diameter - Backing/Carrier: UHMW (Ultra High Molecular Weight) polyethylene film - Adhesive: acrylic - Release Liner: white paper or blue film - Standards Met: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M - Thickness: 11 mils (carrier, adhesive, liner) 7 mils (carrier, adhesive) 2 mils (adhesive) - Adhesion: 60 ounces per inch (to stainless steel test panel) - Tensile Strength: 30 pounds per inch (longitudinal) - Service/Operating Temperature: up to 300F - Elongation: 300 %

Price: 4.64 USD

Location: Fairless Hills, Pennsylvania

End Time: 2024-09-25T23:20:03.000Z

Shipping Cost: N/A USD