LED Digital Clock 12V/24V Dashboard Clock for Car Truck Vehicle Dashboard Clock

Description: Product Description Brief description: High voltage resistant 0.56 inch digital tube electronic clock with case, working voltage DC5V ~ 60V. Using super high precision DS3231 timing chip to ensure accurate time, clock error, within 10 seconds per month normal. Set time, temperature and voltage three practical functions in one Product parameters: 1、Power supply voltage: DC5.0~60V (can be used for 48V and below electric vehicles) 2, temperature function range: -40 ~ 120 degrees, resolution 0.1 degrees. 3, voltmeter function range: DC5 ~ 60V (the current linear voltage error is high, 60V may differ by about 1V, if not accepted, please do not sign) 4, size: opening size 26 * 58mm thick 23MM outer frame size: 60MMX28MM Functions and instructions for use: I. Adjust the time, date, year, voltage error, temperature error cycle display item definition, alternate display interval time In the non-set state, press the key to enter the time adjustment (note that the middle colon is lit), then the "minutes" start flashing, press the upper key to increase, the adjustment range 00 ~ 59. Adjust the "minutes", then press the key again, then the "hours" start flashing, press the upper key to increase, the adjustment range 00 ~ 23. After adjusting the "hour", press the upper key to increase the adjustment range from 00 to 23. After adjusting the "hour", press the lower key to enter the date adjustment (note that the colon in the middle is off), then the "day" starts flashing, press the upper key to increase the adjustment range from 00 to 23. "Press the up button to increase the adjustment range from 1 to 31. After adjusting the "day", press the down key again, then the "month" starts flashing, press the up key to increase, the adjustment range is 1-12. After adjusting the date, press the down button again, then the "year" will start flashing, press the up button to increase, the adjustment range is 2012-2049. After adjusting the "year", press the down key again to enter the error calibration function [x.xU] for the display voltage in 0.1V, a positive number indicates an increase and a negative number a decrease. Then press the key again to enter the temperature 1 error calibration setting [Ac:xx],xx represents the correction value, press the upper key to increase, a positive number indicates an increase, a negative number indicates a decrease in degrees. Then press the key again to enter the temperature 2 error calibration setting [AC:xx],xx represents the calibration value, press the key to increase, a positive number indicates an increase and a negative number indicates a decrease in degrees. Press the key again to enter the definition function dd option of the display item in the cyclic display state, press the upper key to change the value: (dd:0)time+T0+T1+voltage, (dd:1)time+T0+T1, (dd:2)time+T0+voltage, (dd:3)time+voltage. (Note: If Probe 2 [T1] is not plugged in, it will automatically block the display of T1). Then press the down key again to go to the cyclic display alternate interval time dF option, press the up key to change the value, the larger the value the longer the interval. dF please do not set to 0, otherwise it will turn to a black screen. Then press the down key again to go to the brightness level setting LL: 1, press the up key to change the value, there are 3 levels. Then press the key again to go to the brightness auto control setting AL: 0. Press the upper key to change the value, 1 is valid, 0 is not. The meaning of the automatic brightness control is that the brightness will automatically become level 1 from 19:00 to 6:00 am. Finally press the down key again to save all the set values and return to the normal display state. Note: When adjusting the time is not to go, need to set, switch out, only from the set time to start walking time, so if the current time is set according to the points, will certainly feel slow to go, adjust the time, but also hope that buyers pay attention to the next oh. 2、Switch display items In the non-set state, press the right button to switch the display items, the display will be in the time ---> date ---> temperature 1 ---> temperature 2 ---> voltage ---> alternating cycle display between. (Note: if probe 2 is not plugged in, temperature 2 will not be displayed and the date will not participate in the cycle) Package included:1 * Vehicle Electronic Clock Note: 1.Transition: 1cm=10mm=0.39inch. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 3. Please allow slight manual measurement deviation for the data.

Price: 13.64 USD

Location: SZ

End Time: 2025-01-31T05:34:35.000Z

Shipping Cost: 0 USD