MATCH UP 10DSP 10-Ch 840w Amp + 1.9RAM-HK Plug & Play Harness BMW Harman Kardon

Description: MATCH COMBO MATCH UP 10DSP 8x65w+2X160w RMS + 11-Channel 64 Bit DSPMATCH PP-BMW 1.9RAM-HK 9-Ch Upgrade Cable BMW Harmon KardonPlease contact me if you need the MEC Analog Input option MATCH – Plug & Play Car-HifiThe real premium sound upgrade for your car For true music enthusiasts, standard audio systems from car manufacturers do not offer the sound quality that is expected from a true hi-fi system. And even the factory upgrade packages often do not meet the real needs of ambitious music lovers. This gives the impression that musical enjoyment in a vehicle can only be achieved with considerable effort.But the installation of an uncompromising sound system is unfortunately more than ever in conflict with the conversion options in modern vehicles. Not everyone is willing to make major changes to the car – in the case of leased vehicles, this is even a “no go” in most cases.MATCH products from Audiotec Fischer are specially developed as a solution to all these problems. MATCH brings true hi-fi sound into your car as simple as possible, without touching the charm of the “original”. Outstanding sound due to latest DSP technology combined with a clever plug & play concept for easy installation – that's MATCH. The installation effort is reduced to a minimum thanks to car-specific adapter cables. The system can be removed just as easily “without a trace” – ideal when you have to return your leasing vehicle or if you like to sell your car at a later date. The advantages of our MATCH amplifiers at a glance:No need to neither change your factory radio nor your speakersNo modifications to the car’s electrical systemNo interfering with existing CAN / MOST bus systemsAll cables are pre-assembled for true „plug & play”Short installation times (typically less than one hour)No restrictions on everyday usability of the carCan easily be removed without leaving any tracesAdditional benefits of the MATCH micro and UPGRADE amplifier series:More output power compared to PP line for driving upgrade speakersVarious pre-assembled cables for easy connection to existing car components availableCan be combined with factory radios as well as with aftermarket radios MATCH PP-BMW 1.9RAM-HKThe 9-channel UPGRADE cable harness PP-BMW 1.9RAM-HK enables an easy connection of a MATCH UP 10DSP amplifier with integrated Extension Card MEC ANALOG IN to selected BMW vehicles with Harman Kardon sound system and RAM receiver.Important note: Before the first start-up the Highlevel input inside the UP 10DSP amplifier has to be set to the High Voltage Range (jumper position: Input G - H 32V). For more information about setting the input sensitivity please refer to page 35 of the UP 10DSP manual.FeaturesPlug & Play connectors for an easy connection of a MATCH UP 10DSP amplifier with integrated MEC ANALOG IN moduleRAM-connection for connecting the vehicle cable harness with RAM receiverCable length 1.00 meterTechnical dataCable length1.00 meterConnections1 x 20-pole MOLEX plug for the connection of the System Connector input of the UP 10DSP1 x 8-pole MOLEX plug for the connection of the highlevel inputs E - H of the UP 10DSP1 x 12-pole MOLEX plug for the connection of speaker outputs E - J of the UP 10DSP1 x 4-pole MOLEX plug for the connection of the MEC ANALOG IN module1 x 42-pole BMW RAM system jack1 x 42-pole BMW RAM system plugCompatibilityFor connection of the MATCH UP 10DSP with ANALOG IN Extension CardSuitable for BMW vehicles with RAM (Receiver Audio Module) – manufacturing year > mid 2019Compatible with factory installed Harman Kardon sound systemFurther information about the vehicle compatibility can be found in our Upgrade Finder.MATCH UP 10DSPThe premium sound upgrade for multi-channel factory systemsThe new UP 10DSP is a real problem solver when it comes to upgrading premium sound systems in today's vehicles. Even though more and more vehicles are equipped with complex multi-channel sound systems ex works, the sound quality does not always meet one's expectations.In many cases, a replacement is no longer possible, so that only an amplifier with a large number of highlevel inputs and sophisticated technology can be considered for upgrading the system. And here the new UP 10DSP offers the perfect solution.Maximum connectivityFor optimal adaptation to existing multi-channel sound systems, the UP 10DSP is equipped with not less than 8 highlevel inputs (two high power inputs with up to 32 Volts), an optical digital input, a MATCH extension card slot, 10 amplifier outputs and a total of 11 processed DSP channels.In addition, intelligent technologies, such as the proprietary ADEP.3 circuit and 32 Bit ACO platform, ensure safe operation.Virtual Channel Processing – that´s how signal routing works todayThe adaptation to modern OE sound systems via an increasing number of inputs has a significant impact on the complexity of the signal routing inside the amplifier. Especially when several input signals are mixed together and then split again into multi-way systems, conventional routing concepts quickly reach their limits, both in terms of implementation and usability. Audiotec Fischer's new multi-stage "Virtual Channel Processing", in conjunction with the recognized user-friendly DSP PC-Tool software makes it easy to realize even highly complex system configurations. Besides, it allows to freely assign our proprietary FX sound features such as "RealCenter" or "Augmented Bass Processing". But the UP 10DSP, thanks to its enormous number of channels in combination with the optional MEC ANALOG IN module, is also a prime example for applications where 1 to 1 routing (IOR) makes sense.Speed is everything – thanks to ACOSuch a huge number of channels requires ultra-fast hardware – Audiotec Fischer's proprietary 32 Bit ACO platform takes care of all control tasks and ensures the decisive speed increase, especially for data communication with our DSP PC-Tool software but also for the lightning-fast switching between up to ten sound setups. But ACO offers much more – fantastic sound effects such as Augmented Bass Processing or RealCenter are implemented as well as a channel-separated Input EQ including the Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios.Powerhouse in a compact formatDespite its huge output power of 8 x 65 Watts at 4 Ohms and 2 x 90 / 160 Watts at 4 / 2 Ohms at the Sub Outs, as well as the enormous feature set, the UP 10DSP comes in an extremely compact design, so that installation is possible even in confined spaces.FeaturesUltra efficient 10-channel amplifier with 1-channel line output and 11-channel DSPPerfect for upgrading multi-channel factory sound systemsOptional cable harnesses for easy integration into existing multi-channel factory sound systemsExtremely powerful 64 Bit “fixed point” Audio DSPACO – Advanced 32 Bit CoProcessor platform for system and DSP features like:ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signalsSFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.High power 8-channel highlevel input with ADEP.3 circuit – two channels with up to 32 V RMS input sensitivity1:1 IOR (Input-to-Output Routing) in combination with the optional MEC ANALOG IN module – same number of highlevel inputs and amplifier outputsVCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systemsMATCH Extension Card slot (MEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.Optical input in SPDIF format with sampling rate between 12 and 96 kHzMono RCA output for the connection of an external amplifier e.g. subwoofer amplifierSCP (Smart Control Port) for optional accessory like DIRECTOR, CONDUCTOR & Co.Auto Remote switchStart-Stop capability down to 6 Volts supply voltageCompact design with low heat dissipation thanks to extraordinary efficiency Spezielle FeaturesClass GD technologyAudiotec Fischer´s proprietary Class GD concept takes the efficiency of conventional Class D amps to the next level. By varying the internal supply voltage in several steps depending on the amplifier’s input signals, idle losses are significantly reduced and overall efficiency is close to maximum at any time. So heat dissipation is almost negligible, thus allowing smallest heat sinks and most compact form factors.ACO – Advanced 32 Bit CoProcessorThe MATCH UP 10DSP amplifier incorporates an extraordinary powerful 32 Bit CoProcessor of the latest generation for all monitoring and communication tasks, both internally and externally. In opposite to the 8 Bit predecessor generation this MCU achieves way higher speeds with respect to setup switching and data communication with our DSP PC-Tool software. A further significant advantage is the integrated, native boot loader of the CoProcessor. It allows software upgrades of all components of the DSP in order to adjust the microcontroller-controlled ADEP.3 circuit for example at future modifications / changes in the diagnostic system of factory radios or if the device will be extended with additional interfaces. In addition, thanks to the new flash memory, the ACO offers 10 memory locations for sound setups instead of the common two.Smart highlevel input ADEP.3Modern, factory-installed car radios incorporate sophisticated possibilities of diagnosing the connected speakers. In particular the latest generation of car radios are equipped with additional monitoring functions so that failure messages and loss of specific features (e.g. fader function) quite often appear if a common amplifier will be hooked up - but not with the UP 10DSP.The new ADEP.3 circuit (Advanced Diagnostics Error Protection, 3rd Generation) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.Start-Stop capabilityThe switched power supply of the MATCH UP 10DSP assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank. If the supply voltage drops below 10.5 Volts for more than five seconds the amplifier goes to “Protect mode” (Status LED lights up red) in order to avoid any further discharge of the car’s battery.Automatic Digital Signal DetectionThe UP 10DSP allows signal-controlled switching between the analog inputs and the digital input. As soon as an input signal is detected on the Optical Input, the amplifier automatically switches to this input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.Power Save ModeThe Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the UP 10DSP and potentially connected amplifiers once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after locking and leaving the car! Once the “Power Save Mode“ is active the remote output and therefore the connected amplifiers will be turned off. The MATCH UP 10DSP will reactivate the remote output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the DSP PC-Tool software. Note: “The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.”DSP featuresTuneEQTuneEQ is an extremely flexible and particularly easy-to-use function for automated frequency response correction. A single measurement per audio channel or channel pair with a suitable measurement microphone (e.g. our MTK1) is sufficient for TuneEQ to independently and precisely adjust the equalizers to the desired reference curve. TuneEQ uses the full function set of the parametric equalizer including center frequency, Q-factor and gain adjustment. And since the highly complex arithmetic operations required for this run in the background, you also save a lot of time when optimizing your sound with TuneEQ.RealCenterThe “RealCenter” feature is an algorithm, developed by Audiotec Fischer, that emphasizes the music information which is present in both the left and right front channel to create an unique center signal. In contrast to common procedures, in which only the channels are summed up, the intensity of the center signal is also dynamically controlled by the stereophonic informational content of the left and right channel.Sounds complicated but this effect is astonishing: That means if solely the left or right channel delivers an audio signal, the center channel will not reproduce a signal. In the case of common algorithms, the volume level of the center channel is only reduced by 6 dB (= half volume level). Audiotec Fischer’s “RealCenter” allows a unique, broadened sound staging for both driver and co-driver at the same time! Therefore, the disadvantages of a conventional center channel, such as an intrusive, small sound stage, are things of the past.Augmented Bass ProcessingAudiotec Fischer’s proprietary “Augmented Bass Processing”, consisting of the two revolutionary sound features “Dynamic Bass Enhancement” and “SubXpander”, has been especially developed to dramatically improve the bass reproduction of subwoofers.The “Dynamic Bass Enhancement” ingeniously combines maximum deep bass and highest sound pressure – regardless of the music style or the tone controls in the head unit. Depending on the input signal, the “Dynamic Bass Enhancement” gains the lower frequency range and varies the cut-off frequency of the subsonic filter. The result is a significantly more powerful and deeper bass response at low and medium volume levels without the risk of overloading the subwoofer neither mechanically nor electrically at high volume levels. It is simply fascinating which bass performance is suddenly possible.If you want an even lower and “darker” bass reproduction, the “SubXpander” can be additionally activated. Therefore, subharmonic tones are added to the fundamental tones in the frequency range between 50 and 100 Hz.Technical data UP 10DSPOutput power RMS - @ 4 OhmsChannels A - H: 8 x 65 Watts- @ 2 Ohms- - @ 1 Ohm- - bridged @ 4 Ohms- - bridged @ 2 Ohms- - Subwoofer output @ 4 OhmsChannels I - J: 2 x 90 Watts- Subwoofer output @ 2 OhmsChannels I - J: 2 x 160 WattsAmplifier technologyClass GDInputs8 x Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Remote InInput sensitivityChannels A - F: 4 - 16 VoltsChannels G - H: 4 - 16 or 8 - 32 VoltsInput impedance RCA / Cinch- Input impedance highlevel9 - 33 Ohms with ADEP.3Outputs10 x Speaker output1 x RCA / Cinch1 x Remote OutOutput voltage RCA / Cinch3 VoltsFrequency response10 Hz - 22,000 HzDSP resolution64 BitDSP power295 MHz (1.2 billion MAC operations/second)Sampling rate48 kHzDSP typeAudio signal processorSignal convertersA/D: BurrBrownD/A: BurrBrownSignal-to-noise ratio digital input105 dB (A-weighted)Signal-to-noise ratio analog input103 dB (A-weighted)Distortion (THD)< 0.03 %Damping factor> 100Operating voltage10.5 - 18 Volts (max. 5 sec. down to 6 Volts)Power ratingDC 12 V ⎓ 60 A max.Idle current500 mAMax. remote output current500 mAOperating temperature range-40° C to +70° CFuse2 x 25 A LP-Mini-fuse (APS)Additional featuresClass GD technology with dynamically controlledpower supply, 32 Bit CoProcessor, ADEP.3 circuit, Start-Stop capability, Smart Control Port, USB, MEC slot, Auto Remote switch, galvanically isolated Line OutDimensions (H x W x D)46 x 145 x 163 mm /1.81 x 5.71 x 6.42"Scope of delivery1 x MATCH UPGRADE amplifier UP 10DSP4 x Connection cable1 x Control Input-to-SCP adaptor1 x Mounting plates & material1 x Power Input connector1 x USB cable1 x Instruction manual BMW Premium Sound UpgradesEvery ride deserves the right soundtrackBMW moves emotionally and physically. In the air, at motorsport and on the streets. Movement and excitement are connected and inseparable. With Agility, Innovation and comfort BMW transforms locomotion into emotion. We from MATCH use our expertise to create the sound that fits this experience at every ride. With outstanding development, impressive technology and passionate commitment just like BMW.• Original The BMW standard sound system• Advanced Sound Upgrade for the BMW Standard STEREO sound system800 Watts multichannel DSP amplifier for highest sound quality with powerful bass management.2 x 200mm MATCH Subwoofer for the original BMW mounting positions under the front seats.• Premium Sound Upgrade for the BMW HIFI 676 sound system1290 Watts multichannel DSP amplifier for highest sound quality with powerfull bass management.2 x 200mm MATCH Subwoofer for the original BMW mounting positions under the front seats.• Premium Sound Upgrade + for the BMW Harman Kardon surround sound system1540 Watts multichannel DSP amplifier for highest sound quality with powerfull bass management..2 x 200mm MATCH Subwoofer for the original BMW mounting positions under the front seats..The M Power for your soundsystemIntelligent navigation, digital television, hands free and much more multimedia functions are provided in modern BMW vehicles. These technologies are often directly connected to the sound system and form complex electronic concepts. To upgrade the BMW car audio sound system with MATCH it is neither required to disassemble many parts of the vehicle nor to cut any cables.Remaining components of the sound system get simply replaced by high quality modules without harm of the interior design. The range of functions stays untouched and all upgrades can get removed without a trace. That makes MATCH Premium Upgrades the perfect alternative even for leasing vehicles.Power und precision Get gigantic sound improvement and brilliant high frequency reproduction with an extremly compact MATCH DSP amplifier. These small power houses are able to increase the power of your car hi-fi system for approximately 1000 Watts in comparison to the original mounted amplifier.Just like in motorsport power isn´t everything. The precise Digital Signal Processor that is integrated into every MATCH amplifier manages proprietary digital features. These can be used to individually set up the sound to the vehicle model and its occupants.

Price: 1249 USD

Location: Yakima, Washington

End Time: 2024-09-28T17:19:47.000Z

Shipping Cost: 0 USD