Description: *Compatibility Chart 1, Air suspension spring bags installed on the Truck, Coach and Trailer are designed usually as generic types. 2, Firestone Part Number collected all the air suspension model, which could be used as an Integration Code while searching on eBay or Amazon. 3, You can distinguish specific model of air suspension spring bags on your Autotruck/Heavy-Duty Truck/Touring Car/Passenger Coach/Trailer by checking original SPN(Supplier Part Number) listed as below, all of which has a consistent one-to-one match with specific Firestone Part Number. HendricksonS20900 S21800 Hendrickson TrailerS21800 BlacktechRML 78709 CP ContiTech1010515P480 101015S453 10105P460 Goodyear1R13159 Springride1R13262 Triangle8453 8460 *Firestone Part Number W01-358-8709 *Firestone Air Spring Style Number 1T17CA5 *Firestone OEM Number W014558709 *Air Suspension Structure: 1. StudA permanent part of the bead plate assembly used to attach the airspring to the suspension. 2. Combo StudCombination mounting stud and air fitting. 3. Blind NutA permanent part of the bead plate assembly providing an alternate mounting system to the stud. 4. Air Fitting HoleA tapped hole usually 1/4" N.P.T. providing air entrance for the part. 5. Bead PlatePermanently crimped onto the bellows at the factory allowing complete part leak testing prior to shipment. 6. Bellows The heart of an Airide spring. Includes at least four plies, or layers, of material–an inner layer, two plies of cord-reinforced fabric, and an outer layer. 7. Bumper (Optional)A solid molded rubber fail-safe device used on many suspension applications. Prevents excessive damage to vehicle and suspension in the case of sudden air pressure loss. 8. PistonThe lower section of the 1T and 1X style of airspring made from aluminum, steel or fiber reinforced plastic. Provides lower mounting arrangement for the airspring in the form of tapped holes or studs. 9. Piston BoltAttaches the piston to the bellows assembly. Extended, in some cases, to serve as a means of attaching the spring to the suspension. 10. Girdle HoopA ring between the convolutions of the convolutedtype air spring. *Removal Warning & Notice: Vent all air pressure from the air suspension system prior to disconnecting or removing any air suspension components. It is dangerous to remove air suspension components while under pressure. Failure to follow this instruction may result in serious personal injury. Any air spring which is unfolded must be refolded prior to being installed in a vehicle. Refer to the procedure. An incorrectly folded air spring could rupture, altering the handling characteristics of the vehicle. If a vehicle has been driven with an incorrectly folded air spring, a new air spring must be installed. Failure to follow these instructions may result in serious injury to vehicle occupant(s). Failure to observe the following instructions may result in a sudden failure of the air spring or suspension system. Any rear spring which is unfolded must be refolded prior to being installed in a vehicle. The air spring refolding procedure should only be used for an air spring which has never supported the vehicles weight while in the incorrectly folded position. Incorrectly folded air springs found on vehicles during pre-delivery inspection or after use must be installed new. Do not attempt to inflate any air spring which has been collapsed while uninflated from the rebound hanging position to the jounce stop. When installing a new air spring, care must be taken not to apply a load to the suspension until springs have been inflated using the air spring fill procedure. After inflating an air spring in the hanging position, it must be inspected for correct shape.1.NOTE: The vehicle must be positioned on a suitable lifting device prior to deflating the air suspension system.With the vehicle in NEUTRAL, position on a hoist until the wheel and tire assemblies are slightly above the ground. 2.Using the scan tool, vent the air springs.3.Remove the air spring retainer.4.Detach the air spring from the rear axle. 5.Remove the air spring in the following sequence. 1.Disconnect the air spring solenoid electrical connector. 2.Compress the quick connect locking ring and pull out the air tube. 3.Remove the air spring. Payment 1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. Shipping 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 2. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service 3.We do not offer local pickups. 4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. 3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement. 4. Return shipping is to be paid by the Buyer. Contact Us We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. All rights reserved.
Price: 161.45 USD
Location: Ontario, California
End Time: 2024-07-15T01:35:10.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Placement on Vehicle: Left, Right, Front, Rear
Size: Single Dimension(CM) 30.00(length)*27.00(width)*27.00(height)
Single Weight(KG): 7.100
Included Hardware: None
Upper Mount Type: Stud
Lower Mount Type: Stud
Drive Layout: Universal
Platform: Universal
Material: Rubber, Aluminium Alloy, Iron
Color: Black
Type: Air Suspension Spring
Custom Bundle: No
Return Policy: 30 Days Free Return
Manufacturer Warranty: 1 Year
Quantity: Pair
Fitment Type: Direct Replacement
OE Spec or Performance/Custom: OE Spec
Adjustable: Yes
Features: Sealed
Brand: autodayplus
UPC: Does not apply
Manufacturer Part Number: ADP81934901S
Interchange Part Number: W01-358-8709, 1T17CA5
Other Part Number: S20900, S21800
Superseded Part Number: 1010515P480, 101015S453, 10105P460, 1R13159, RML78709CP