PEI plate Build Platform+Magnetic Sticker Geeetech A20M Hotbed 3D Printer part

Description: Items Included:Spring Steel Sheet pre-applied PEI Sheet+Magnetic Rubber Platethe magnetic base can stand the high temp at 140C without losing magnetism, suitable for almost all filaments. PLA, ABS, PC, etcAdvtanges:Never warp& Never rust.Easy to get the first layer even for a new userFlexible, Removable, stick to magnets very wellSuits variety of filaments, especially for PLAFree clean- just flex the plate a little then take the prints off after cooledFast heater performance, less waiting time after printing.A lifetime 3D printer bedWhy our price is higher?1. smooth PEI- 0.2MM thickness with 3M468 tape2.Our spring steel sheet is flat.3.Strong magnetic base: 1.5MM, 300LSE tape, magnetism-600GS high temp resist up to 130C at long timeMaterial:100% real Ultem1000（ PEI）amber color, matte surface. - Made in EuropeThis spring steel sheet is flat, flexible, stainless stick to magnets very well. 0.4mm thicknessPEI is 3m tape pre-applied, free bubbles.Important Information:1.Recommend print tempsPLA – 60CHTPLA – 60CPETG – 70-80CPCTG – 70-80CABS – 100C2.Product Usage GuidelinesPETG/PCTG/TPU– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEIPart Removal– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surfaceHow to use?After apply the PEI sheet on our special spring stainless steel sheet, You can simply use 4 clips or magnets to hold it on the heatbed, then enjoy the printing.Easily remove 3D prints on printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier.For details, Check the guide video on YoutubeAftersales:If any quality problem, free returning.Or send a message, we will reply you within 12 hours

Price: 23.1 USD

Location: 天津

End Time: 2024-12-16T09:49:12.000Z

Shipping Cost: 15 USD