Pro Body Tool for Pinewood Derby Cars

Description: Pro Body Tool for Pinewood Derby Cars This product is for Pinewood Derby, Awana, Royal Rangers and other organizations that have races similar to the Pinewood Derby. The Pro Body Tool is a drilling aid to help create correctly placed axle holes on the body or correct mis-aligned slots in stock blocks when rules require their use. Easily place the axle holes perpendicular to the centerline of the car so your car will go straight down the track. Locate all of the axle holes at the same height on the body so the car sits square on the track. Reduce friction!!! By correctly placing the axles in the body, a builder will not have to bend or tweak the axles to get the car to run straight. Can drill holes for raised wheels. A hand drill is required. This tool is equipped with guide hole for BSA, PineCar, and other kits requiring a #44 drill bit. A #44 drill bit is included. How to use the Pro Body Tool on your Pinewood Derby Car Standard Pinewood Derby car blocks have grooves in the bottom of the car for the axles guides. Grooved blocks have two problems. The first is that the groove is often not at a perfect right angle with the block and the second is that it is very difficult to insert the axle in the groove so that the axle is level with the track. This tool: Allows you to drill accurate axle guide holes that are square and true into the existing axle slots with a hand drill! Your car will go faster if the axles are mounted correctly! If your race allows axle holes, you can use this tool as a guide for drilling accurate holes. Again, improved axle mounting accuracy equals greater speed! By correctly drilling the axle holes in the body, you will reduce friction and the car will run straight without bending the axles. The required #44 drill bit needed for drilling the axle hole is included. This tool easily places the axle holes perpendicular to the center line of the car and ensures that all the axles are parallel. The result is that your Pinewood Derby car will run straight down the track. Test fit the Body Tool on the bottom of the block with the two 'ears' on the sides of the block. If the tool will not fit , use coarse grit sandpaper to reduce the width of the block until the tool fits. If the tool is loose, place a piece of paper - folded as needed - between one 'ear" of the tool and the block. To create pilot holes in axle slots - Use a straight edge to draw a straight line on one side of the car starting at the middle of the axle slot to the top of the car. Repeat for the other axle slot. To create new axle holes - Measure and mark the position of the new axle holes on one side of the block. Draw a straight line from the mark to the top of the block. Repeat for the other end of the block. Position the tool on the bottom of the Pinewood Derby car with the two 'ears' on the sides of the block. Align the index mark with the line on the block. Clamp the tool in place. Slowly drill through the guide hole in the tool and 3/4" into the block. Without releasing the clamp, turn the tool and block over and drill the second hole. Repeat for the other two holes. We offer hundreds of items to help you build fast Pinewood Derby cars. Browse through our eBay store to see how we can help you. WE DO COMBINE SHIPPING ON MULTIPLE ITEMS: Use the shopping cart feature above to add items to your cart to calculate shipping costs. RETURNS: Full refund on any returned unused item within 60 days of purchase.

Price: 13.95 USD

Location: Centralia, Washington

End Time: 2024-02-13T03:53:50.000Z

Shipping Cost: N/A USD