Description: Diesel Fuel Injection Pump drive seal 1998.5 - 2002 5.9L Dodge Cummins VP44 pumps. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Aftermarket seal replaces-1-460-285-006*Fits 25mm drive shafts Please read this whole page, lots of good stuff here, thanks. Tip Corner: If you choose to replace your drive seal without disassembling pump completely here are a few tips. Using a medium screw driver and bench grinder create a tool similar to the last picture. The orange lines show the screw driver shape before grinding. Using a hammer gently tap the screw driver between the rubber part of the seal and the pump drive shaft. Care must be used to avoid damaging the main pump Aluminum Housing. (Picture A) Gently push the screw driver down thus prying up on the seal. If the seal appears to be to be bending instead of pulling out you may need to tap it slightly again or move the screw driver to a new position and try from there. You may have to pry from several sides before the seal will be removed (Picture B) With some luck you will have the results found in (Picture C) Clean seal area. Lubricate both inside and outside areas of the new seal. Using the hammer gently tap the seal in with a perfect sized deep well socket. Seal needs to be kept level as it enters the pump.(Picture D). New seal (rubber coated) may be taller that the older seal so the seal will be flush with the pump housing once installed.Please Note: Your fuel injection pump is a highly technical device. Not only does it control your engine, but it also protects it as well. Repairing a pump yourself is a great way to save money; however, extra caution must be used as serious pump and/or engine damage can occur. Repairing your own injection pump means you are assuming this risk.* Name and Numbers are used for reference purposes only: items are not the products of these manufacturers.
Price: 17 USD
Location: Huntsville, Alabama
End Time: 2024-01-17T14:48:49.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Country/Region of Manufacture: Germany
OE/OEM Part Number: 1-460-285-006, 1460285006
Interchange Part Number: 1-460-285-006-R, 1460285006, 81 1452, 811452, F 00N 202 337, F00N202337, K400011/R12-19, K400011 R12-19
Type: Drive Shaft Seal
Pump Style: VP44
Manufacturer Part Number: 1-460-285-006*, 1460285006
Universal Fitment: No
Brand: Flag
