Description: Operation Typically used on exit doors, when unauthorized egress is initiated when in the locked mode, the SDC Exit Check delays egress through the door for 15 or 30 seconds. Meanwhile, the person exiting must wait while personnel or security respond. The door unlocks after 15 seconds have elapsed, permitting egress. A signal from the fire life safety system will release the lock for uninhibited egress in an emergency. 30 second delay available where approved. Self Adjusting Door Movement Sensor The built-in door movement sensor may only be used with doors equipped with a latch assembly, such as a mechanical lockset or exit device. The mechanical latch mechanism must be locked on the exterior and unlocked on the interior. From the inside, retracting the door latch and applying pressure causes limited door movement. The built-in activation trigger senses the door movement and initiates delayed egress operation. The self adjusting sensor helps prevent false triggering. Activatiion for Non-latching Doors The external activation trigger input must be used with doors without latch assemblies, such as latchless glass and herculite doors. Activation may be triggered by the SDC MSB550 Switch Bar or the SDC Sure Exit, request-to-exit push bar. A power transfer device is required. Pushing on the request to exit push bar immediately activates the delayed egress operation. Model 1511SNAKV (standard) Single - 1,650 lbs., voice, tone and digital countdown annunciator, NA (15or30sec) operation, K keyed reset, V aluminum finish Electrical Specifications Input Voltage: Dual voltage Sensing 12/24 VDC ± 10% Standard 1650lbs Holding Force 830mA @ 12VDC 450mA @ 24VDC Inputs Request to Exit: Normally open, dry Fire Alarm Release: Alarm panel closed dry contact. Opening of contact releases lock. Mechanical Specifications Single: 11 inch L x 2-3/4 inch H x 2-5/8 inch D (279 x 70 x 67mm) Armature: 7-3/8 inch L x 2-3/8 inch H x 9/16 inch D (187 x 60 x 14mm) AI description: This SDC / Security Door Controls - 1511SNAKV Delayed Egress Maglock Mag Lock is a top-of-the-line access control equipment suitable for various industries. Its brand, SDC, is known for producing high-quality locks that provide maximum security. With its electromagnetic design, this lock ensures that your facility is safe and secure at all times. It is perfect for use in businesses and industrial settings where the need for access control is high. The lock is easy to install and use, making it a convenient option for anyone looking to enhance their facility's security.
Price: 499.95 USD
Location: Waterford, Wisconsin
End Time: 2025-01-14T00:55:04.000Z
Shipping Cost: 20 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: SDC
MPN: N/A
