Sika 207 Stix Automotive Pinchweld & Glass Primer Stick Single Application 1.4ml

Description: Sika 207 Stix Automotive Pinchweld & Glass Primer Stick Single Application 1.4ml SKU: Sika Stik 207 MSRP: $12.99 Brand: Sika Condition: New Package Quantity: 1 Interchange Part Number: 207Stix Placement on Vehicle: Pinchweld Warranty: Yes Surface Finish: Black Primer Heated: n/a Sika Primer-207 1.4 ml Stix single use applicator is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.Sika Primer-207 is specifically formulated for the treatment of bond faces prior to application of Sikas 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation step on many substrates. Sika Primer-207 fluoresces under long-wave UV light for a limited period of time. This feature is used for in-process control. Enhanced adhesion on a wide variety of substratesVisible under UV lightEasy to useUsageSika Primer-207 is used to improve adhesion on a very broad range of different substrates such as float glass, ceramic-coated glass, plastics, pre-coatings, painted surfaces, E-coats and metals.Seek manufacturers advice and perform tests on original substrates before using Sika Primer-207 on materials prone to stress cracking.This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Product DetailsTypical Product DataChemical base Solvent-based Polyurethane solution Color (CQP001-1) BlackSolid content 27 %Application temperature 5 ????????? 40 CApplication method Brush, felt or foam applicatorConsumption depending on substrate porosity 50 ml/m2 Flash-off time above 5 C maximum 10 minutesA 24 hoursA Shelf life (CQP016-1) 1000 ml smaller packagings 9 monthsB 12 monthsB CQP = Corporate Quality Procedure A)for specific application, temperature and flash-off time may be different B)stored in sealed container in up-right position in a dry place 25 CIMPORTANT NOTE If Sika Primer-207 is used below 5 C further testing under expected conditions are mandatory.Sika Primer-207 is a moisture reactive system. In order to maintain product quality it is important to reseal the container with the inner plastic liner immediately after use. Once the surface pre-treatment operation is completed, the cap has to be screwed on. Never dilute or mix this product with any other substances.If used on transparent or translucent substrates such as float glass, plastics, etc., an adequate UV protection is mandatory.DETECTION OF THE LUMINESCENCE Sika Primer-207 can be visualized by using a light source with a wavelength of 320 to 420nm as inline control. By reducing foreign light such as sunlight or artificial light during the detecting process the quality of the detection can be increased significantly.Note: The luminescent effect will degrade with time.METHOD OF APPLICATION Surfaces must be clean, dry and free from grease, oil, dust and contaminants.Adhesion on substrates may be improved by adding and/or combining pre-treatment processes such as scuffing, cleaning and activating.The Single Use Applicator Stix, shake the applicator for a minimum of 30 seconds prior to use. To begin priming with the Single Use Applicator Stix, point the tip toward the ground and pinch tube just above the tip with the thumb and forefinger to break the internal vial and release the Sika Primer-207 into the tip. With the tip down, gently squeeze the Stix applicator to wet out the tip, being careful not to squeeze too hard creating a drip. When the tip is fully saturated, begin priming the pinchweld immediately. Allow gravity to feed the tip, but you may gently squeeze the Stix applicator if more primer is needed. Sika 207 Stix Single Use Application 1.4ml To be used to prepare surfaces after new paint. For exposed metal areas when glass is removed to prevent rust. To be used on encapsulated (framed metal or plastic) parts 5 minute flash time Professional use product. *Seller highly recommends buyer use a qualified glass installer for use of this product For use as body prep on all Auto Glass and Pinchweld installations To be used with Sika Urethane Only PAYMENTS We are a PayPal-certified seller and we accept all major credit cards. DOMESTIC SHIPPING We offer free shipping on most of our items within the continental USA. Shipments to Alaska, Hawaii, Puerto Rico and other U.S. territories may not be eligible for free shipping. INTERNATIONAL SHIPPING International shipments and shipments going outside of the continental USA may require 2-3 days prior to shipment. Our parts are designed for USA production models and may not cross fit for worldwide applications. Buyers are responsible for confirming international applications prior to purchasing. RETURNS If there are any issues with your order please contact us prior to returning any parts. We are happy to help correct any problems. Buyers are responsible for return shipping costs, unless the error was on our end. We are set up with Ebay returns, which should be used to process and print a return label. Returns will be accepted within 60 days. Orders must be returned in original packaging and in re-sellable condition. If the item shows any sign of wear or damage no refund will be issued. Orders must be returned in original packaging and in re-sellable condition. If the item shows any sign of wear or damage no refund will be issued. The Vehicle Compatibility chart should only be used as a guide and does not confirm all possible options that may be available for your vehicle. Due diligence is the responsibility of the Buyer to confirm that the part(s) they order are correct, using the information provided within the Seller's details. When in doubt, it is highly recommended to ask questions prior to ordering. We are happy to help in any way we can.

Price: 8.99 USD

Location: Sykesville, Maryland

End Time: 2024-09-13T17:24:53.000Z

Shipping Cost: 0 USD