Description: STANLEY 101 CONVERSION PLANE FULLY FUNCTIONING 3-1/2" long , 1-1/4" wide , cutter 1" wide work done Started with a Stanley 101 stripped the body then removed the thumb slot from the nose so the knob could sit flat on the body. I left the raise nub on the heal this helps keep the tote in place. The Tote is grooved on the front which slides into the cutter rails which keeps the tote secure. Hand made tote & knob finished off with a thick coat of clear lacquer. Tote and knob are held in place with brass counter sunk screw coming up through the sole. I did not add Fack barrel nuts to these they look great either way. The cutter is a original Stanley its been lapped and sharpened. The cap was made from a piece of the sole from a no.5 Stanley. I cut out a section from the heal to make it. Cap now reads No.1. Last pic shows what I used to make it. The tension screw comes from a Stanley 95 butt gauge. I do my best to repurpose vintage plane parts to make my conversions. Each plane has its own individual characteristics. While they will make a great addition to any mini plane collection they are a fully functioning plane. I have been selling my planes on eBay for over 20 years and have always strived to put out a excellent plane at a very reasonable price and back it with a 100 percent satisfaction guarantee.
Price: 200 USD
Location: Gordon, Texas
End Time: 2024-11-29T08:18:03.000Z
Shipping Cost: 12.5 USD
Product Images
Item Specifics
Restocking Fee: 20%
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Stanley
Country of Manufacture: United States
Original/Reproduction: CUSTOM
Country/Region of Manufacture: United States
Modified Item: YES
