Walther PPK Finger Grip Extension Jet Black (also fits PPK/s)

Description: Walther PPK Finger Grip Extension 3D Printed!! Jet Black (also fits PPK/s)Condition is New. Shipped with USPS First Class. 3D printed PPK Finger Grip Magazine ExtensionJet Black Precision measured and printed to slide on firm and snug. See Walther Owners Manual for magazine disassembly/reassembly instructions and warnings. 3D printed texture provides excellent grip despite smooth appearance.Also works as a display stand! Stands up by itself on level surface. This is for the finger rest extension only (other items shown for reference)See my other listings for matching grips.Can print additional colors upon request. message me.These are made to fit Walther PPK and PPK/s 380 caliber magazines (should fit other calibers as well... if not let me know and I can make it right) Follow instructions below, last pics have the "floorplate" circled in red which is the part that this finger grip replaces Thanks 8.2.1 Magazine Disassembly:• Using a drift punch, depress the floorplate catch (4) through the hole in the floorplate (5).• Slide the floorplate (5) off of the tube (1) while holding the floorplate catch (4) in the tube(1).• Remove the floorplate catch (4) and spring (3) out through the bottom of the tube (1).• Turn the tube (1) right side up and remove the follower (2) through the bottom of the tube (1). 8.2.2 Magazine Reassembly:• Install follower (2) in the bottom of the tube (1) with the notched edges of the follower (2) toward the round side of the tube (1).• Install the spring (3) and floorplate catch (4) in the tube (1).• While holding the floorplate catch (4) in the tube (1), slide the floorplate (5) ontothe tube (1) so that the round projection of the floorplate catch (4) engages the floorplate (5).

Price: 14.95 USD

Location: Hastings, Minnesota

End Time: 2024-04-06T13:07:11.000Z

Shipping Cost: N/A USD